Advertisement
Fields of application
The AS29 vacuum pump is among others suitable for the operation in the following areas:
crafts,
hobbies,
modelling,
tattoos and body art,
make-up and nail design,
as a source of air in the medical field,
in food and chemical industries,
in laboratories,
for inflating pneumatic tyres and
for filling balloons.
Technical specifications
Type
Power (W)
Rotation speed (rpm)
Noise level ( ㏈ (A))
ℓ
Suction volume (
⁄
)
min
Vacuum (㎜ Hg)
Hose connection (㎜)
Weight (㎏)
Size (㎜)
Cable length (m)
Notes:
The vacuum pump has a 12.91 mm outlet (¼", male thread), which can be effortlessly
changed to ⅛". The matching adapter is not included in the supply.
When the vacuum pump is connected by the hose to the airbrush gun, the vacuum pump can
be connected to the mains and be switched on.
The maximum pressure is displayed by the pressure gauge, the operating pressure can be
adjusted by the pressure regulator.
The hose included is air-impermeable. If the auto-stop mode is activated (repeatedly switch
on/off) any and all screw fittings and connections should be sealed by a teflon tape.
Leakage control
Switch on the compressor and wait until the maximum pressure has built up and the auto-stop
function has been activated.
If there is no leakage, the pressure gauge should display nearly constantly the same range of
pressure.
A quick decrease of the range of pressure suggests that there is in fact a leakage.
It is of great importance to seal any leak as soon as possible in order to avoid any impact on
the capacity and efficiency of the compressor.
A leak causes the auto-stop and auto-start function to be carried out permanently.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Oil-free vacuum pump
370 (½ hp)
1450–1700
≤55
128–135
600
12.91 (¼")
8.65
415×365×285
1.9
Item 34243
Page 5
03
2021-1
Advertisement
