Danfoss EM-PMI375 User Manual page 9

User Guide
EM-PMI375
General information
© Danfoss | November 2021
EM-PMI375-T800 options (continued)
Variant Code
Rotation sensor (resolver) *
+RES1
+RES2
Winding temperature *
sensor
+TEMP4
+TEMP5
Bearing temperature *
sensors
+BTMP1
Anti-condensation heaters *
+HEAT1
Marine classification *
+CL1
+CL2
+CL3
+CL4
+CL5
EM-PMI375-T1100 options
Variant Code
High voltage connections *
-DUAL
-TRI
Low voltage connections *
+LVB1
N-end attachment *
+NE2
Bearing lubrication and *
mounting direction
+BGL
Description Additional information
None No resolver
Resolver In-built non contacting resolver, 6-pole
pair
Double resolver 2 x In-built non contacting resolver, 6-pole
pair
Temperature surveillance 3 x PT100 in windings
Redundant temperature 6 x PT100 in windings
surveillance
Redundant temperature 12 x PT100 (two wire) in windings (Not
surveillance available with +LVB1 option)
None
PT100 in bearings Plug-in connector
None
One anti-condensation 230VAC/65W
heater
No marine classification
ABS American Bureau of Shipping
BV Bureau Veritas
DNV
LR Lloyd's Register
RINA
Description Additional information
One 3 phase system One connection box containing one 3
phase system with one M25 cable gland
per phase
Two galvanically isolated 3 Two connection boxes each containing
phase systems one 3 phase system with one M25 cable
gland per phase
Three galvanically isolated Two connection boxes one containing one
3 phase systems 3 phase system and another one
containing two 3 phase systems with one
M25 cable gland per phase
Low voltage connections DEUTSCH HD34-24-47PE connector for LV
done with connector connections
Low voltage connections Connection box with 2x M25 cable glands
done with connection box (reserve 2x plugged M16 threads
and terminal strip available) and terminal block for LV
connections
Flange SAE 4 flywheel housing
Male shaft + Flange DIN5480 W50x2x24x8f + SAE 4 flywheel
housing
Grease lubricated Deep groove ball bearing, open design.
Horizontal mounting direction.
Greased for life Deep groove ball bearing, contact seal on
both sides. Any mounting direction.
Maximum speed 3400 rpm.
BC265856307805en-000202 | 9