Table of Contents
Advertisement
User Guide
EM-PMI375
Installation
40 |
©
Danfoss | November 2021
Mechanical mounting connections of the electric machine (vertical mounting)
1 N-end flange (SAE 4 flywheel housing) with 12x30°xM10x1,5 bores. Depth of the thread is 19 mm. Minimum bolt
thread engagement of 16 mm is required.
2 Bores for the lifting eyes, N-end.
3 Shaft of the electric machine; spline structure of the shaft (DIN5480 W50x2x24x8f)
4 D-end flange (SAE3). Use mounting bolts (12 pcs of DIN912 M10, not included in the delivery).
Additional mounting points (1), 12 total
BC265856307805en-000202
Advertisement
Table of Contents
