Conformity According To Standards - Danfoss EM-PMI375 User Manual

Hide thumbs Also See for EM-PMI375:
Table of Contents

Advertisement

User Guide
EM-PMI375
General information

Conformity according to standards

10 |
©
Danfoss | November 2021
EM-PMI375-T1100 options (continued)
Variant
Code
Bearing insulation
*
+BIN
+BIA
Shaft grounding
*
+SG1
Protection class
*
+IP67
Cable direction
*
+CNE
Rotation sensor (resolver)
*
+RES1
+RES2
Winding temperature
*
sensor
+TEMP4
+TEMP5
Bearing temperature sensor *
+BTMP1
Anti-condensation heaters
*
+HEAT1
Marine classification
*
+CL1
+CL2
+CL3
+CL4
+CL5
The electric machine has been designed to be in conformity with the following directives and to meet the
requirements specified in the following standards:
Applicable Directives and standards
Standard
Low Voltage Directive
2006/95/EC (until 19.4.2016)
and Low Voltage Directive
2014/35/EU (from 20.4.2016
onwards)
IEC 60034-1:2010
Description
Non-insulated bearings
Insulated bearing in N-end
Insulated bearing in both
ends
None
D-end shaft grounding
Standard protection class
IP67 protection class
Cable direction fixed
Cable direction towards N-
end
None
Resolver
Double resolver
Temperature surveillance
Redundant temperature
surveillance
Redundant temperature
surveillance
None
PT100 in bearings
None
One anti-condensation
heater
No marine classification
Explanation
Electrical equipment means any equipment designed for use with a voltage
rating of between 50 and 1000 V for alternating current. This electric
machine is subject to the Low Voltage Directive 2006/95/EC or 2014/35/EC.
Rotating electrical machines - Part 1: Rating and performance
Additional information
Non-insulated bearings
Insulated bearing in N-end
Insulated bearing in both ends
In-built grounding ring
IP65 protection class
IP67 protection class, only available with
+BGL
Cable direction towards D-end
Cable direction towards N-end
No resolver
In-built non contacting resolver, 6-pole
pair
2 x In-built non contacting resolver, 6-pole
pair
3 x PT100 in the windings
6 x PT100 in the windings
12 x PT100 (two wire) in windings (Not
available with +LVB1 option)
Plug-in connector
230VAC/130W
ABS American Bureau of Shipping
BV Bureau Veritas
DNV
LR Lloyd's Register
RINA
BC265856307805en-000202

Advertisement

Table of Contents
loading

Table of Contents