Table of Contents
Advertisement
User Guide
EM-PMI375
Installation
50 |
©
Danfoss | November 2021
The electric machine has a connector or a connection box which is used to read out in-built temperature
and rotation sensor (resolver) data from the electric machine. The temperature data comes from PT100
sensors in the stator windings and in some cases in the bearings. The rating plate has the information
about the options of the electric machine: different options add sensors, and some electric machines do
not have all the sensors. For more information about the options, refer to Chapter
convention
on page 5.
Recommended cable types for low voltage connections
Application
Resolver cabling
Temperature measurement (PT100)
Low voltage connector (1), Deutsch HD34-24-47PE
Low voltage connection box (+LVB1 -option)
Product naming
Cable type
Shielded cable (twisted pair)
Shielded cable (twisted pair)
BC265856307805en-000202
Advertisement
Table of Contents
