Danfoss EM-PMI375 User Manual page 6

User Guide
EM-PMI375
General information
6 | © Danfoss | November 2021
EM-PMI375-T200 options
Variant Code
Low voltage connections *
+LVB1
N-end attachment *
+NE2
Bearing lubrication and *
mounting direction
+BHS
Bearing insulation *
+BIN
+BIA
Shaft grounding *
+SG1
Protection class *
+IP67
Cable direction *
+CNE
Rotation sensor (resolver) *
+RES1
Winding temperature *
sensors
+TEMP4
Bearing temperature *
sensors
+BTMP1
Anti-condensation heaters *
+HEAT1
Marine classification *
+CL1
+CL2
+CL3
+CL4
+CL5
Description Additional information
Low voltage connections DEUTSCH HD34-24-47PE connector for LV
done with connector connections
Low voltage connections Connection box with 2x M25 cable glands
done with connection box (reserve 2x plugged M16 threads
and terminal strip available) and terminal block for LV
connections
Flange SAE 4 flywheel housing
Male shaft + Flange DIN5480 W50x2x24x8f + SAE 4 flywheel
housing
Greased for life Deep groove ball bearing, contact seal on
both sides, any mounting direction (see
user guide for details)
Grease lubricated Deep groove ball bearing, open design,
horizontal mounting direction (see user
guide for details)
Non-insulated bearings Non-insulated bearings
Insulated bearing in N-end Insulated bearing in N-end
Insulated bearing in both Insulated bearing in both ends
ends
None
D-end shaft grounding In-built grounding ring
Standard protection class IP65 protection class
IP67 protection class IP67 protection class, not available with
+BHS option
Cable direction fixed Cable direction towards D-end
Cable direction towards N- Cable direction towards N-end
end
None No resolver
Resolver In-built non contacting resolver, 6-pole
pair
Temperature surveillance 3 x PT100 in windings
Redundant temperature 6 x PT100 in windings
surveillance
None None
PT-100 in bearings Plug-in connector
None None
One anti-condensation 230VAC/65W
heater
No marine classification
ABS American Bureau of Shipping
BV Bureau Veritas
DNV
LR Lloyd's Register
RINA
BC265856307805en-000202