Siemens SIMATIC ET 200SP Equipment Manual page 55

Hide thumbs Also See for SIMATIC ET 200SP:

Table of Contents

• Invalid/inconsistent firmware present

• Diagnostic queue overflow

• Undertemperature

• Supply voltage too high

• Supply voltage too low

• F-module error (0x032F)

Channel-wide diagnostic interrupts

• Discrepancy failure, channel status 0/0

• Discrepancy failure, channel status 0/1

• Discrepancy failure, channel status 1/0

• Discrepancy failure, channel status 1/1

• Input signal not recorded unique

• Internal sensor supply short-circuit to P

• Overload or internal sensor supply short-circuit to ground

• F-address memory not accessible

• No valid F-address available

• Sensor signal flutters

• Frequency too high

• Discrepancy failure

• Input shorted to P

Digital input module F-DI 8x24VDC HF (6ES7136-6BA01-0CA0)

Equipment Manual, 10/2021, A5E50578307-AA

Interrupts/diagnostic messages

6.2 Interrupts

Table of Contents