Siemens SIMATIC PCS 7 Manual page 66

9 Engineering Steps for the Maintenance Station [all]
8. Press "Ok" to compile the charts with the Option "Generate module drivers"
activated.
9. Right-click the Plan folder under the "WinLC RTX" Station and choose "PLC >
Download" from the context menu.
Figure 9-6
10. Select "Entire program" and confirm with "OK" in the dialog box.
11. Change to the application "WinLC RTX" and click "RUN" to start the CPU (if
necessary, click Stop at first, then RUN).
Figure 9-7
Note The CPU of the WinLC RTX Station cannot be used as an AS with a user
program (as with CFC, FBD...). The PDM MS records the diagnostic data
cyclically and triggers maintenance messages. The user program always runs on
a separate AS. ".
PDM Maintenance Station
Entry ID: 109776936, V1.0, 02/2020
66