Siemens SIMATIC PCS 7 Manual page 31

6 Setting Up an IE/PB Link
8. Double-click the PROFIBUS interface of the IE/PB Link.
For older IE/PB Link types, select the option "no DP" under the "Operating
mode" tab. With newer types, "DP Master" is always active.
Figure 6-4
9. Load the configuration into the IE/PB Link.
Note The IE/PB Link can now be used as a gateway between plant bus and
PROFIBUS DP network.
PDM Maintenance Station
Entry ID: 109776936, V1.0, 02/2020
31