Siemens SIMATIC PCS 7 Manual page 49

8 Creation of the PDM Network Structure for the Maintenance Project
6. Open the "Communication" tab and click "Use network adapter", then select
the TCP/IP adapter under "Network adapter".
Figure 8-5
7. Optionally, the Ethernet network can be renamed, e.g. from "PROFINET
network" to "Plant Bus".
The following steps are only necessary if you use field devices from a PCS 7 or S7
automation project.
8. Right-click the Ethernet network and select "Object properties..." from the
context menu.
9. Open the "Communication" tab and enter the subnet ID of the plant bus.
Figure 8-6
Note You can find the subnet ID in the HW Config in the properties of the interface to
the plant bus of each AS Station, or in NetPro directly in the properties of the
plant bus.
PDM Maintenance Station
Entry ID: 109776936, V1.0, 02/2020
49