8 Creation of the PDM Network Structure for the Maintenance Project
Creation of the PDM Network Structure for
8
the Maintenance Project
8.1
Creating a new Project
8.1.1
Creating a Project on the Microbox IPC [all]
1. In the SIMATIC Manager, select the menu command File > New.... Assign the
name and storage location for the maintenance project and assign the project
type as "Project" (for a single project).
2. Insert a SIMATIC PC Station, enter the computer name of the PDM MS
(usually "PDM-MS") in the "Name:" input field.
3. Check the option under "Computer name" to apply the computer name here as
well.
Figure 8-1
4. Open the hardware configuration of the PC station.
5. Select the desired "WinLC-RTX" in the hardware catalog under "SIMATIC PC
Station > Controller > WinLC RTX" and insert the "WinLC-RTX" into the
configuration table using drag & drop.
6. Select the "WinCC Application" in the hardware catalog under "SIMATIC PC
Station > HMI" and insert the "WinCC Application" into the configuration table
using drag & drop.
PDM Maintenance Station
Entry ID: 109776936,
V1.0,
02/2020
47