Rack System Warnings - Oracle EE200 External Safety And Compliance Manual

Reliable Earthing – Reliable earthing of rack-mounted equipment should be maintained.
■
Particular attention should be given to supply connections other than direct connections to
the branch circuit (for example, use of power strips).
Slide/rail mounted equipment must not be used as a shelf or workspace.
Caution -

Rack System Warnings

The following warnings apply to Racks and Rack Mounted systems.
For safety, equipment should always be loaded from the bottom up. That is, install the
Caution -
equipment that will be mounted in the lowest part of the rack first, then the next higher systems,
etc.
To prevent the rack from tipping during equipment installation, the anti-tilt bar on the
Caution -
rack must be deployed.
To prevent extreme operating temperature within the rack insure that the maximum
Caution -
temperature does not exceed the product's ambient rated temperatures.
To prevent extreme operating temperatures due to reduced airflow consideration
Caution -
should be made to the amount of air flow that is required for a safe operation of the equipment.
Take adequate precautions when moving a rack or library that contains rack-installed
Caution -
equipment. The weight of some rack equipment may have altered the rack or library center of
gravity and could cause an overbalance/tip condition during a move.
For tape libraries, ensure that the equipment to be installed in the rack has UL
Caution -
Listing, CSA or C-UL Certification, and is CE marked.
Safety Precautions
Safety Agency Compliance Statements 35