Installing A Drive Bay - Dell EMC PowerEdge T550 Installation And Service Manual

Figure 68. Removing a NVMe drive bay
Next steps
Replacing the drive bay.

Installing a drive bay

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3. Remove all the drives.
4. Remove the backplane from drive
Steps
1. Insert the drive bay into the drive bay slot in the system.
2. Using the Phillips 2 screwdriver secure the drive bay to the system.
NOTE: The procedure to install the drive bays is similar for all configurations.
74 Installing and removing system components
Safety instructions.
Before working inside your
bay.
system.