System Feet; Removing The System Feet - Dell EMC PowerEdge T550 Installation And Service Manual

Figure 26. Installing the front bezel

System feet

Removing the system feet

Prerequisites
NOTE: It is recommended that you remove the system feet only when you are converting the system from the tower mode
to the rack mode, or when you are replacing the system feet with the wheel assembly.
1. Follow the safety guidelines listed in
2. Place the system on its side on a flat, stable surface.
3. Rotate the system feet inward.
Steps
1. Using the Phillips 2 screwdriver, remove the screw that secures the foot to the base of the system.
2. Repeat the preceding step to remove the remaining system feet.
38 Installing and removing system components
Safety instructions.