Chapter 1: Before you begin......................4 Check the graphics options on your computer......................4 Modes of connection................................4 Turn off the internal display..............................5 Chapter 2: Connect external displays.................... 6 Integrated graphics................................6 Chapter 3: Troubleshooting......................10 Chapter 4: Getting help and contacting Dell................. 11 Contents...
USB-C adapters can also be used to connect external displays to the computer, though these do not allow power charging at the same time. For more information about the types of USB-C adapters available from Dell, search in the Knowledge Base Resource at www.dell.com/support.
Turn off the internal display There may be instances where you may want to turn off the computer's internal display to connect more external displays. You can turn off the display of your computer by using the Intel HD Graphics Command Center. To turn off the display: 1.
Connect external displays You can connect up to four external displays to the computer, with the use of a USB-C docking station. The number of displays supported depends on the following: ● If the internal display is enabled or disabled. ●...
Page 7
● Connect an external display using a direct USB-C or Thunderbolt cable: ● Connect an external display using a USB-C to Thunderbolt/HDMI/DisplayPort adapter: Connect external displays...
Page 8
● Connect up to two external displays using a USB-C docking station: ● Connect up to three external displays using a USB-C docking station: With the internal display turned off NOTE: Ensure that you turn off the computer's internal display before connecting the external displays. For more information, see Turn off the internal display.
Page 9
You can connect external displays directly to the Thunderbolt 4 (USB-C) ports, or up to four external displays using a USB-C docking station and a direct connection to the Thunderbolt 4 (USB-C) port with a USB-C or Thunderbolt cable. NOTE: The connected USB Type-C display provides power to the computer.
Troubleshooting 8K display not displaying correctly Question When I connect an 8K display to the computer using a Thunderbolt docking station, the display output is not correct from the computer. Cause This may be because of a hardware limitation with the Thunderbolt docking station. Workaround Connect the 8K display directly to a Thunderbolt port on the computer (not using a docking station).
Getting help and contacting Dell Self-help resources You can get information and help on Dell products and services using these self-help resources: Table 3. Self-help resources Self-help resources Resource location Information about Dell products and services www.dell.com My Dell app...
Need help?
Do you have a question about the T05J and is the answer not in the manual?
Questions and answers