Gpu Card Holder; Removing The Gpu Card Holder; Installing The Gpu Card Holder - Dell EMC PowerEdge T550 Installation And Service Manual

GPU card holder

Removing the GPU card holder

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3. Remove the air shroud.
Steps
Loosen the captive screws and pull the GPU card holder from the system.
Figure 132. Removing GPU card holder
Next steps
Replace the GPU card holder.

Installing the GPU card holder

Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3. Remove the air shroud.
Steps
1. Align and lower the GPU card holder to the guide pin on the system.
2. Tighten the captive screws, until the GPU card holder is firmly seated.
Safety instructions.
Before working inside your
Safety instructions.
Before working inside your
system.
system.
Installing and removing system components 131