Ô
By selecting [Add Setup], the "Add Setup" dialog is displayed.
Select "Use defaults" or "Copy values from setup" and click the [OK] button to add the setting.
Use defaults
Add new settings from default values.
Copy values from setup
Copy values from existing settings and add new settings.
Setup 1 is added.
Ö
For changing each parameter of the added settings, change the settings on the table displayed in the Read Setups screen
as indicated in the procedure . Alternatively, the settings can be changed by clicking the icon of each setting in each
application step screen or in the [Settings] tab.
When tuning the code reader in each read setup setting, it must be performed by selecting a read setup in the [Settings] tab.
APPX
80
Appendix 1 Read Setups
Õ