APPENDIX
Appendix 1
Read Setups
A code reader can have up to 16 different settings. This means a code can be read by using up to 16 settings. If the code is
failed to read by the first setting, the second setting is used, and if the reading is failed, the third setting is used and so on.
When the code is read successfully during the process, the reading ends at that time and no further reading is performed.
Additionally the code can be trained for each setting.
The procedure for setting read setups is shown as below.
Ò
Select [Read Setups] in the [Settings] tab.
A
Ó
Current setting information is displayed.
APPX
79
Appendix 1 Read Setups