Appendix 8
Customizing Output Data
Adding the number of a read setup whose reading is succeeded to output data
For details of the read setups settings, refer to 'Appendix 1 Read Setups.'
The following describes the setting method when the target code is Data Matrix.
Ò
A
Select the [Format Data] of [Application Steps] and select the checkbox of "Standard" for "Data Matrix." Click "Standard" to
move to the link.
Ó
Add "<Used Read Setup>" from "Data." When two read setups are trained and a code is read with the first read setup
setting, read data is output with "0" being added to the data. For the second read setup, "1" added to the read data. (In the
example above, <Used Read Setup> is added on top of <Full string> and <SP> which have already been added in advance.)
APPX
95
Appendix 8 Customizing Output Data