9.2
Restore
This is a function to restore a code reader using a backup file.
Precautions
In the following cases, the [Restore] button is grayed out and the button cannot be clicked.
• A matched IP address is not set.
• The code reader is connected with SetupTool.
• A valid configuration source is not specified.
The restoring procedure is shown as below.
Ò
Ó
Select the [Home] tab.
Click [Restore].
Select a code reader to restore.
Select 'Configuration File' from the "Configuration Source" section, and click the file specification button on the right side of
the item.
9 HOME TAB FUNCTIONS
72
9.2 Restore
Õ
Ô