8.6
Communications
The settings for connecting the code reader with the connected devices via serial or Ethernet (SLMP, CC-Link IE Field
Network Basic, EtherNet/IP
*1 Only the CF37 series supports it.
Serial
Configure serial port settings.
For a setting example when communicating the code reader with a programmable controller via serial communication, refer to
the following:
Code Reader Connection Guide
Speed, Parity, Data Bits, and Stop Bits must be configured same as the communication target.
Ethernet
Select the checkbox of a protocol to be used on Ethernet.
For a setting example when communicating the code reader with a programmable controller, refer to the following:
Code Reader Connection Guide
8 Application Steps
68
8.6 Communications
*1
*1
, and MODBUS/TCP
) communication are configured.