Mitsubishi Electric Melsensor CF37-SR Settings Manual page 35

(5)
(4) (6)
(13)
(14)
(4) Magnifying glass icons
To zoom in and out the displaying image.
(5) Autofit Mode
To restore the zoomed-in or zoomed-out image to the normal size.
(6) Pixel to Pixel Mode
To display pixel grids emphatically when a zoomed image is used.
(7) Reset ROI
To restore the entire image to the standard size when a reading region (a blue frame within the image) is adjusted.
(8) Enable/disable image transfer
To stop displaying an image in SetupTool when this function is disabled. However, images are kept being acquired and read
by the code reader even if the image transfer is disabled.
(9) Enable/disable Focus Feedback on image while in Live mode
When this function is enabled, a bar indicating the focus of the lens is displayed during Live mode.
(10) Size
To change the resolution of an image to be displayed. The size can be changed among four patterns: Full, Quarter, 1/16 and
1/64. Smaller image size can speed up the image trasnfer. The size also relates to the image quality of an image file to be
saved. The reading time is not affected by changing the image size.
(11) Format
To change the file format of image data to be imported to a personal computer. The format can be switched among "JPEG,"
"Bitmap," and "PNG."
(12) Copy, Save Image, and Logging
"Copy" is for copying the displaying image and can be pasted on applications such as Excel and PowerPoint. "Save Image" is
for saving the displaying image as an image file. "Logging" is for setting the function whose an image file is saved
automatically.
(13) Exposure and Gain
To adjust the brightness of an image to be imported. Increasing the value can make the image brighter. Gain is adjusted when
the exposure time cannot be extended.
(14) Focus
To adjust the focus of liquid lens.
(8)
(7) (9) (10)
(11) (12)
6 SetupTool SCREEN
33
6.5 Image Panel
6