Mitsubishi Electric Melsensor CF37-SR Settings Manual page 27

Õ
5
 When the IP address is changed, click [Connect] on the left side of the SetupTool screen. Select the code reader icon to be
connected, and click the [Connect] button on the lower right of the screen or double-click the icon.
Copying the static IP address of a personal computer
  Follow the same procedure as  and  in 'Section 5.3 Setting a static IP address to a code reader.'
Ô
 Click [] on the right side of [Copy PC Network Settings] and select an Ethernet port to be connected.
(Select the same port as the one selected in the procedure  in Section 5.1)
5 CONNECTING with SetupTool
25
5.3 How to Check and Set Code Reader IP Address