8
Application Steps
8.1
Optimize Image
Mainly, settings for reading operation are configured. This is the area where 'Tune' is configured as the main setting of the
code reader.
Optimize Image consists of three buttons: [Live], [Tune], and [Test]. Each button has a drop-down window to set additional
options.
Live
This function not only can monitor images whose the code reader captures, but also can read codes.
Operation options for performing a live display can be set by the drop-down window of the [Live] button.
■ Decoding
Select this checkbox to read codes from captured images.
■ Focus Feedback
By selecting this checkbox, a bar which indicates the focus of lens is displayed on the right side of the Image Panel.
When the code is focused
■ Automatic Exposure
Select this checkbox to make the code reader automatically determine the best exposure time.
Tune
This function automatically configures the settings according to the reading environment.
For details, refer to 'Chapter 7 Section 7.2 Settings in Tune.'
8 Application Steps
44
8.1 Optimize Image
When the code is out of focus