Preface; Appropriate Operation; Functionality Logicsp-2-1 / Logicsp-2-2; Audience And Previous Knowledge - LOGICDATA LogicSP-2-1 User Manual

User Manual
LogicSP-2-1 / LogicSP-2-2

1. Preface

Dear customer,
Thank you for choosing a LogicSP-2-1 / LogicSP-2-2 motor control box for height adjustable
TV-Set Carriers from LOGICDATA GmbH. You have purchased a state-of-the-art product which
complies with all safety requirements.

1.1. Appropriate Operation

LogicSP-2-1 / LogicSP-2-2 motor control boxes must solely be used for the intended
application, control of height- and angle-adjustable TV-Set Carriers. (Such as the LiftBox™
system.) Use only motors that meet the specifications of LOGICDATA GmbH to drive the lifting
column and for rotating the TV-Set Carrier. (The rotation function is available only in the
LogicSP-2-2 control box.) The control box must be installed, initially operated and functional
tested by competent personnel only. Use other than described above is only allowed with
permission of LOGICDATA. The basic functionality is up/down movement of the TV-Set Carrier
(doable with any LOGICDATA handset).

1.2. Functionality LogicSP-2-1 / LogicSP-2-2

The motor control boxes LogicSP-2-1 / LogicSP-2-2 offer following functionality and
performance characteristics (however, the practical applicability of these functions depends on
the used handset and the connected motors):
Control boxes are available for different mains voltages
•
All LOGICDATA handsets are utilizable optionally
•
Depending on the type of handset used, additional functionality (e.g. right/left rotation for the
•
Rotation-LiftBox™) is available
ISP (Intelligent System Protection)
•
Configurable stop conditions (overtemperature, overcurrent, timeout, limit switches)
•
Configurable reset conditions
•
Configurable duty cycle
•
1 or 2 independently controlled motors
•
Hall-Sensor configuration per motor group (1, 2 or differential hall-sensors)
•
Plug Detection
•
1 Memory Position per Motor
•
Additional pinch-protection with squeeze line
•
Drive-Back function on various conditions
•
Remote Controlled
•
TV-Overheating Protection
•

1.3. Audience and Previous Knowledge

This user manual is intended for the following audience:
Assembly personnel: Technicians who assemble and start up the height-adjustable TV-Set
•
Carrier system (mount control box and motors, configure the control box, etc.).
Furniture assembly personnel, service personnel, which puts the height-adjustable TV-Set
•
Carrier system into operation on site in showrooms or directly at the end customer's place.
To put into operation, mount and configure height-adjustable TV-Set Carriers with the LogicSP
control box, following skills are prerequisite:
Basic mechanical and electronics skills
•
Lecture of this manual
•
Page 5 of 29