Lightspeed Activate System User Manual page 29

ADDITIONAL CAPABILITIES AVAILABLE WITH
ACTIVATE APP
Mic to Mic:
If your system is equipped with a second Flexmike,
the Activate app allows you to activate Mic to Mic
mode where two teachers can have a direct 2-way
conversation with each other. Toggle the Mic to Mic
function ON in the Settings tab and an icon will appear
on the remote screen. Tap the Mic to Mic icon to call
the other teacher. The second teacher will then need
to "answer" the call by tapping "Mic to Mic" on their
screen.
Disable Teacher call (1):
Turning off this feature disables the blue call button on
the top of the Pods. This feature is turned on by default,
allowing students to notify the teacher when they need
assistance.
Pod Control Lock (2):
Turning this feature on will lock the Pod power in
the on position as long as the Pods remain linked
to the system. This is designed to prevent students
from inadvertently powering the Pods off. The Pods
are designed to remain on during charging, so there
is generally no need to power them off. Turning this
feature on will also lock Pod volume.
Orientation (3):
Allows users to flip the orientation of the Remote screen
to adapt to right and left handed users.
Enable Sleep mode (4):
Your Access system comes with sleep mode disabled
by default, keeping it powered on and operable at
all times. To engage sleep mode, toggle it to the ON
position in the settings tab. The Access system will go
into sleep (low power) mode after 2 hours of no activity.
Wake the system back up by un-muting a microphone.
CONT'D
3
4
1
2
29