Section 4; Record And Capture - Lightspeed Activate System User Manual

SECTION 4:

RECORD AND CAPTURE

1. VIDEO + AUDIO RECORDING
The Activate mobile app allows teachers to utilize their device video camera synced
together with the Activate system audio to capture key moments in the classroom.
Through the Bluetooth audio link, the App will seamlessly sync up the selected audio
source (teacher microphone or Pods) with the video you have recorded.
1. Tap the record tab
2. Select desired audio source
3. Select front or back camera
4. Begin recording
22
• Verify the Bluetooth audio connection is
present as indicated by a "headphone"
icon in the lower left hand corner of the
screen.
• Select Video capture at the top of the
screen.
• Note the selected source indicated in the
upper left hand corner of the screen.
• If you wish to change the source, swipe
right on the screen to reveal the control
arc.
• To record teacher audio only, select the
class button. Make sure your microphone
is unmuted.
• To record student group audio, select the
desired Pod.
NOTE: For optimum student audio
quality, the teacher microphone should
be muted.
• Tap the red record button to begin the
video recording.
• To pause the video recording, tap the
pause button.
• To end the recording, press the stop
button.
• To capture a still photo during the
recording, tap the white shutter button
• You will see the last recorded video
appear as a thumbnail for quick review.
1
2
1
3
4