Table of Contents
Advertisement
3. REMOTE RECORDING
Remote recording allows the teacher to use his/her primary mobile device to start a
recording on a secondary mobile device (on a tripod in the front of the classroom for
example). During remote recording, the teacher can select pods or class as normal while
the secondary device is capturing video synced with that selected audio.
1. Pair two mobile devices to the Activate Station.
One as BT1 and the other as BT2.
2. On the teacher's primary device, enable
remote recording. This device will become the
"controller".
3. Setup the two mobile devices to record
•
4. Begin recording
24
•
To enable remote recording, toggle it to the ON
position in the settings tab.
•
To set up the mobile device as the controller,
tap the white " Remote Record" icon on the
video recording preview. This will disable the
video camera on the device and show the arc
along with the record button which you can
press when ready.
With the controller device set up to begin your
recording, set the second mobile device to
capture the video for your recording.
•
Tap the red record button on the controller
device to begin the video recording.
•
To pause the video recording, tap the pause
button.
•
To end the recording, press the stop button.
•
You will see the last recorded video appear as a
thumbnail for quick review on the mobile device
acting as your camera.
2
3
4
Advertisement
Table of Contents
Need help?
Do you have a question about the Activate System and is the answer not in the manual?
Questions and answers