Table of Contents
Advertisement
7. PAIR YOUR MOBILE DEVICE TO ACTIVATE
STATION
1. Open the Activate App on your device and make sure Bluetooth is turned on.
2. You will see a set of instructions that will take you through the two pairing
processes.
3. Begin by pressing the Bluetooth 1 pairing button on the back of your Activate Station
to connect to the Lightspeed system for remote control functionality. Once paired,
any registered Pods, if purchased, will appear on the mobile app.
4. You can now pair to Bluetooth audio. The app will take you through a pairing guide
and will instruct you to go to your mobile device Settings>Bluetooth. Choose your
Activate Station number (ACT_XXXX_BT1) from the list of unpaired devices.
5. Next enter the pin #0000 to complete the pairing process.
6. Press the pair button within the app when prompted. The device should now show as
connected.
7. Return to the Activate mobile app. It will take you through a tutorial on how to use
the various functions, including some additional functions available only through the
app.
8. If there is a second Flexmike for team teaching, repeat the above process with a
second mobile device and press the Bluetooth 2 button on the back of the Activate
Station.
14
Bluetooth 1 pairing button
Activate
Advertisement
Table of Contents
Need help?
Do you have a question about the Activate System and is the answer not in the manual?
Questions and answers