Insert The Toner Container" Is Displayed Caused By Half-Insertion Of The Front Door Sw Connectors - Canon C5500 Series Troubleshooting Manual

"Insert the toner container" is displayed caused by half-insertion
of the front door SW connectors
For CE
[Symptom]
When starting the main body, "Insert the toner container" may be displayed.
[Cause]
The connector [1] on the inner side of the toner bottle inner door interferes with the mold of the bottle front inner guide [2], and
the connector cannot be fully inserted and the above-mentioned symptom may occur.
[Service work]
1) Removing the ITB Unit
2) Removing the Process Unit
3) Pull up the Control Panel [1] and remove the Right Front Cover [2].
-1 Screw [3] (to remove)
-1 Screw [4] (to loosen)
-1 Claw [5]
4) Open the toner replacement cover [1], remove the 1 screw [3] and remove the 1 small plate [2].
17