Table of Contents
Advertisement
Measures when paper is not stapled (corner/double) after
installation (Inner Finisher-G1/H1/K1)
For CE
[Symptom]
In operation of stapling (corner/double) after installation of Inner Finisher, paper may not be stapled.
[Cause]
When installing Inner Finisher, distortion may occur in Inner Finisher.
If the center return belt guide [1] on the front side slips into the edge of the assist unit sheet metal [2] due to this distortion, paper
in staple operation is caught on by the center return belt guide and is not fed up to the stapling position, resulting in the above-
mentioned symptom.
[Service work]
If the above-mentioned symptom occurs, remove the center return belt guide from slipping into state.
1) Insert approx. 20 sheets of A4 or LTR-size plain paper [1] through the delivery outlet [2] of Inner Finisher up to position [a] in
the arrow direction.
[Reference] If the paper retainer [1] blocks the delivery outlet, move the paper retainer in the arrow direction manually.
22
Advertisement
Table of Contents
