Table of Contents
Advertisement
1) Remove the stack tray [1] and the grate-shaped lower guide [2] by referring to the Service Manual.
2) If the bushing [2] on the rear side of the lower delivery roller [1] is detached from the supporting plate, go to the step 3). If the
bushing [2] is not detached, go to the step 7).
3) Remove the supporting plate [1] of the bushing on the near side.
- Screw [2] 1 pcs
4) Remove the busing [2] from the lower delivery roller shaft [1].
41
Advertisement
Table of Contents
