MAINTENANCE PROCEDURES
tmo2016-010-053_a
FRONT OF VEHICLE
1. Outer drive shaft bellows
tmo2016-010-045_a
REAR OF VEHICLE
1. Inner drive shaft bellows
tmo2016-010-046_a
REAR OF VEHICLE
1. Outer drive shaft bellows
Wheel Bearing
Wheel Bearing Inspection
Lift and support vehicle. Refer to
ING AND SUPPORTING THE VEHI-
CLE
.
Push and pull the wheels from the up-
per edge to feel the play.
______________
142
See an authorized Can-Am dealer, a re-
pair shop or person of your choosing if
there is an excessive play.
tmo2016-010-047_a
TYPICAL
Wheels and Tires
Wheel Removal
Loosen nuts then lift and support vehi-
cle. Refer to
ING VEHICLE
Remove nuts then remove wheel.
Wheel Installation
Inspect studs and nuts. Replace if
needed.
The tires are unidirectional and their ro-
tation must be kept in a specific direc-
tion for proper operation.
Tighten wheel lug nuts in accordance
with the following illustration.
Wheel lug nuts
LIFT-
LIFTING AND SUPPORT-
.
TIGHTENING TORQUE
100 N•m ± 10 N•m
(74 lbf•ft ± 7 lbf•ft)