Can-Am DEFENDER MAX Series 2021 Operator's Manual page 129

219001807-008
3. Unscrew coolant drain plug and
drain the coolant into a suitable con-
tainer.
NOTE: Do not unscrew the coolant
drain plug completely.
219001750-009_a
HD5
1. Water pump cover
2. Coolant drain plug
3. Oil filter cover
tmo2011-001-120_a
HD8 AND HD10
1. Oil filter cover
2. Water pump cover
3. Coolant drain plug
4. Disconnect the lower radiator hose
and drain the remaining coolant into
a suitable container.
NOTE: Take note of the position of the
hose clamp on the lower radiator hose
at the radiator.
tmo2016-010-090_a
1. Lower radiator hose to disconnect
5. Drain cooling system completely.
6. Reinstall cooling system drain plug
and tighten to specification.
Coolant drain
plug
7. Reinstall radiator hose as noted prior
to removal.
8. Fill cooling system with coolant,
refer to
ING
procedure.
Cooling System Bleeding
Models with a Heating/Air
Conditioning System
1. Put the fan speed to MAX.
2. Raise the temperature control to the
maximum.
All Models
3. Remove the pressure cap.
4. Fill coolant system until it is full up to
the Max line on the coolant bottle.
______________
MAINTENANCE PROCEDURES
TIGHTENING TORQUE
10 N•m ± 1 N•m
(89 lbf•in ± 9 lbf•in)
COOLING SYSTEM BLEED-
127