Can-Am DEFENDER MAX Series 2021 Operator's Manual page 125

vmr2015-008-001_a
1. Full
2. Add
To add oil, remove the dipstick. Place a
funnel into the dipstick hole.
Add a small amount of recommended
oil and recheck oil level.
Repeat the above procedures until
oil level reaches the dipstick's upper
mark.
NOTE: Do not overfill. Wipe off any
spillage.
Properly tighten dipstick.
Recommended Engine Oil
Rotax ® engines were developed and
validated using the XPS™ oil. BRP rec-
ommends the use of its XPS engine oil
or an equivalent at all time. Damages
caused by the use of an oil not suitable
for the engine may not be covered by
the BRP Limited Warranty.
XPS RECOMMENDED ENGINE OIL
General
purpose
Cold
temperature
Warm
temperature
IF THE RECOMMENDED XPS
ENGINE OIL IS NOT AVAILABLE
Use a 4-stroke SAE engine oil
meeting or exceeding the following
lubricant industry specifications.
Always check the API service label
certification on the oil container, it must
contain at least one of the indicated
standards.
– API service classification SJ, SL,
SM or SN
Engine Oil Change
CAUTION The engine oil can
be very hot. Wait until engine oil is
warm.
NOTICE
must be replaced at the same time.
Bring engine to its normal operating
temperature.
______________
MAINTENANCE PROCEDURES
Scandinavia:
4T 5W40 SYNTHETIC
BLEND OIL (EUR)
(P/N 779290)
Other Countries:
4T 5W40 SYNTHETIC
BLEND OIL
(P/N 779133)
Scandinavia:
4T 0W40 SYNTHETIC
OIL (EUR)
(P/N 779286)
Other Countries:
4T 0W40 SYNTHETIC
OIL (P/N 779139)
Scandinavia:
4T 10W50
SYNTHETIC OIL
(EUR) (P/N 779240)
Other Countries:
4T 10W50
SYNTHETIC OIL
(P/N 779234)
Engine oil and oil filter
123