Warranty - MAGUIRE WEIGH SCALE BLENDER Installation Operation & Maintenance

B L E N D E R 
W E I G H S C A L E
M A G U I R E P R O D U C T S , I N C .
Warranty – Exclusive 5-Year
MAGUIRE PRODUCTS offers THE MOST COMPREHENSIVE
WARRANTY in the plastics equipment industry. We warrant each Weigh
Scale Blender manufactured by us to be free from defects in material and
workmanship under normal use and service; excluding only those items
listed below as 'excluded items'; our obligation under this warranty being
limited to making good at our factory any Weigh Scale Blender which shall
within FIVE (5) YEARS after delivery to the original purchaser be
RETURNED intact to us, transportation charges PREPAID, and which our
examination shall disclose to our satisfaction to have been thus defective;
this warranty being expressly in lieu of all other warranties expressed or
implied
and of all other obligations or liabilities on our part, and MAGUIRE PRODUCTS neither assumes nor
authorizes any other persons to assume for it any other liability in connection with the sale of its Weigh
Scale Blenders.
This warranty shall not apply to any Weigh Scale Blender, which shall have been repaired or altered
outside MAGUIRE PRODUCTS factory, unless such repair or alteration was, in our judgment, not
responsible for the failure; nor which has been subject to misuse, negligence or accident, incorrect wiring
by others, or installation or use not in accord with instructions furnished by Maguire Products.
Our liability under this warranty will extend ONLY to equipment that is returned to our factory in Aston,
Pennsylvania, PREPAID.
Please note that we always strive to satisfy our customers in whatever manner is deemed most expedient
to overcome any problems they may have in connection with our equipment.
EXCLUDED ITEMS:
LOAD CELLS on our WEIGH SCALE BLENDER are covered as long as they have not been damaged from
improper handling. MB, 100, and 200 series units use load cells rated for 6.6 pounds (3KG) maximum
load. Larger units use load cells rated for 22 pounds (10KG). DO NOT press on them manually. DO NOT
disassemble them from their mounting enclosures. Do not DROP then. Do not drop the frame to which
they are mounted. If the frame is dropped from a height of two feet, the load cells will most likely be
damaged.
DISCLAIMER:
Processing conditions and materials vary widely from customer to customer and from product to product.
Please be aware that it is IMPOSSIBLE for us to anticipate ALL processing conditions and requirements, or
to be certain that our equipment will perform properly in all instances. You, the customer, must observe
and verify the performance level of our equipment in your plant as part of your overall manufacturing
process. You must verify to your own satisfaction that this level of performance meets your requirements.
We CAN NOT be responsible for losses due to product that is blended incorrectly, even when due to
equipment malfunction or design incorrect for your requirements; and/or for any consequential losses due
to our equipment not blending to your requirements.
We will only be responsible to correct, repair, replace, or accept return for full refund if we have
inadvertently misrepresented our equipment for your application.
140