Warranty Novatec, Inc. - Effective Date 8 May 2017 - MAGUIRE NOVATEC VL Series Instruction Manual

11.0 WARRANTY NOVATEC, INC. - Effective Date 8 MAY 2017

NOVATEC, INC. offers COMPREHENSIVE PRODUCT WARRANTIES on all of
our plastics auxiliary equipment. We warrant each NOVATEC manufactured product
to be free from defects in materials and workmanship, under normal use and
service for the periods listed under "Warranty Periods". The obligation of
Novatec, under this warranty, is limited to repairing or furnishing, without
charge, a similar part to replace any part which fails under normal use
due to a material or workmanship defect, within its respective warranty
period. It is the purchaser's responsibility to provide Novatec with
immediate written notice of any such suspected defect. W arranted
replacement parts are billed and shipped freight pre-paid. The purchaser
must return the suspect defective part, freight prepaid and with identifying
documentation to receive full credit for the part returned. Novatec shall not be
held liable for damages or delay caused by defects. No allowance will be
made for repairs or alterations without the written consent or approval of
Novatec.
Please note that we always strive to satisfy our customers in whatever manner is deemed most expedient to overcome any issues in connection with our equipment.
Warranty Periods:
Note: All warranty periods commence with the shipment of the equipment to the customer.
Resin Drying to Include
NovaWheel™ Dryers *
Dual Bed Dryers
NovaDrier *
NDM-5 Membrane Dryer
Gas-Fired Process Heaters
Gas-Fired Regeneration Heaters
Drying Hoppers
Central Drying Hopper Assemblies
Heater/Blower Units and Hot-Air Dryer
Silo Dehumidifiers
NovaVac Dryers *
When a Prophecy data plan is activated for VPDB and SVP pumps with PumpSense™, Novatec automatically extends the warranty to 3 years. The data plan
must be activated within 60 days after pump shipment, and remain active through the warranty period to maintain extended warranty eligibility. The first 6-months
of data plan usage is free from Novatec.
Central System Controls to Include
FlexTouch™ Series Controls
FlexXpand™ Series Controls
OptiFlex™ Series Controls
PLC Communications Modules
Greenboard Communications Modules
LOGO! Mini PLC
Moisture Measurement Equipment to Include
MoistureMaster®
PET Resin Crystallizers
Resin Conveying System Components to Include
*VPDB Vacuum Positive Displacement Pumps
*SVP Vacuum Pumps
MVP Vacuum Pumps
UltraVac Vacuum Pumps
Vacuum Regenerative Blower Pumps
Velocity Control Valves
*See 3-Year Warranty above
VL-VLP IM 19 JUNE 2017
5-Year
3-Year
2-Year
1-Year
© 2017 NOVATEC, Inc. All Rights Reserved
The provisions in equipment specifications are descriptive, unless
expressly stated as warranties. The liability of Novatec to the
purchaser, except as to title, arising out of the supplying of the said
equipment, or its use, whether based upon warranty, contract or negligence,
shall not in any case exceed the cost of correcting defects in the
equipment as herein provided. All such liability shall terminate upon
the expiration of said warranty periods. Novatec shall not in any event be
held liable for any special, indirect or consequential damages.
Commodities not manufactured by Novatec are warranted and guaranteed
to Novatec by the original manufacturer and then only to the extent that
Novatec is able to enforce such warranty or guaranty. Novatec, Inc.
has not authorized anyone to make any warranty or representation
other than the warranty contained here. Non-payment of invoice beyond 90
days will invalidate the warranty. A renewed warranty can be purchased directly
from
Resin Blending and Feeding to Include
WSB Blenders, MaxiBatch & Feeders *
Gaylord Sweeper Systems
Resin Conveying to Include
GSL Series Vacuum Loaders
GlassVu Loaders, Receivers and Hoppers
Downstream Extrusion Equipment to Include
C and NC Bessemer Series Cutters
NPS Bessemer Series Pullers
NPC Mini Puller/Cutter
All NS Series Servo Saws
All Cooling and Vacuum Tanks Manufactured by Novatec
Resin Conveying and Systems Components to Include
VL/VLP Series Loaders
VRH, VR, VR-FL & VRP Series Receivers
Compressed Air Loaders
AL-B Barrel Loader
Cyclone Dust Collectors
Conveying System Accessories
Surge Bins
Valves and Accessories
Electronic Metal Separators
Quick Select Manifolds
Tilt Tables
Filter Dust Collectors
Drawer Magnets
Central System Controls to Include
MCS-600 Series Controls – (Distributed I/O)
MCS-400 Series Controls
CL Silo Manager
Infrared Dryers
Custom Equipment of any kind unless otherwise specified
Railcar Unloading Systems
Novatec.
Page 21