MAGUIRE WEIGH SCALE BLENDER Installation Operation & Maintenance page 32

B L E N D E R 
W E I G H S C A L E
KEYSTROKE SEQUENCE for these or other SPECIAL FEATURES
Making Changes to Parameters - Keypad Sequence:
Switch the STOP END OF CYCLE switch DOWN:
Turn POWER ON. Wait 5 seconds, until display says WAITING
Press
Press
To alter a PARAMETER:
Press
Press
Press
Press
Making Changes to
Press
Press
Press
Press XX (2-digit code)
Press
Press
Press
Toggle forward through the component parameters by continuing to press the SET key.
Press the VIEW key to move backwards through the component parameters.
Display will say: ENTER PASSWORD
Display will say: PROGRAM
This is the Program Mode
Press repeatedly until the parameter you want is displayed.
If you accidentally pass it, use the * key to back up. With
the proper parameter displayed, enter the NEW number.
Enter 5 digits; use leading zeros if necessary. For correct
entries, follow specific directions given in the PARAMETER
section.
Display will say: PROGRAM
Display will say: SAVE USER SETTINGS
This saves the changes made
Display will say: WAITING when settings are complete.
Functions - Keypad Sequence:
Display will say: ENTER PASSWORD
Display will say: PROGRAM
This is the PROGRAM MODE
Display will say: INSTRUCTION [ _ _ ]
Enter the 2-digit code. For correct entries, follow specific
directions given in the KEYPAD section, STAR
FUNCTIONS.
Display will say: PROGRAM
Display will say: SAVE USER SETTINGS
This saves the changes made
Display will say: WAITING when settings are complete.
M A G U I R E P R O D U C T S , I N C .
32