MAGUIRE WEIGH SCALE BLENDER Installation Operation & Maintenance page 24

B L E N D E R 
W E I G H S C A L E
PRESS
PRESS
PRESS
REPEAT THIS
SEQUENCE
3. OPERATE OTHER DEVICES
PRESS
PRESS
PRESS
PRESS
PRESS
Display will say OPERATE DEVICES
Regrind Slide Gate will operate.
Display will say REGRIND: ON
Press "REG" repeatedly to observe operation.
Natural Slide Gate will operate.
Display will say NATURAL: ON
Press "NAT" repeatedly to observe operation.
Repeat process with COL & ADD for each dispense valve on your
WEIGH SCALE BLENDER. Only those connected to devices will
operate.
The weigh bin air solenoid will operate. Display will show DUMP: ON
The weigh bin dump valve will open.
Press, "DUMP" repeatedly to observe operation.
This key controls the mix motor outlet on the side of the controller.
The mixer motor will run. Display will show MIXER: ON
Mix blade turns clockwise facing the motor shaft or 270º on Pneumatic Mix Motors.
Mixer switch must be down; timed position.
The Flow Control Valve will operate. Display will show HOLD: ON
(Under the mix chamber - this device is optional)
The Strobe light and Beeper will operate.
Display will show ALARM: ON
Press twice, to return to normal mode.
Verify normal mode by observing that the display shows WAITING in lower right.
M A G U I R E P R O D U C T S , I N C .
24