8: History; View Events - Honeywell Fire-Lite Alarms MRP-2001 Instruction Manual

Programming
The ANN-RLY module provides ten Form-C relays which can be programmed for various
functions. The initial screen displays Relays 1 through 3. Pressing the down arrow key will display
the remaining relays for this module.
To program any of the ANN-RLY relays, while viewing the appropriate ANN-RLY Option screen,
press the number key corresponding to the relay to be programmed. Following is a list of the
available programming options for each relay:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3.5.8 History
PROGRAMMING
The History option allows an authorized user to view or erase events which have occurred in the
1=ANN-BUS
2=HISTORY control panel. Pressing 2 while viewing Programming Screen #3 will display the History options as
3=WALKTEST
shown in the following display:
Programming Screen #3

View Events

Pressing 1 while viewing the History Screen will allow the user to select the events to be viewed as
illustrated in the following:
70
General Alarm
General Trouble
General Supervisory
Future Use
Future Use
Future Use
General Discharge
Discharge Release 1
Discharge Release 2
AC Loss
Waterflow Delay
Future Use
Future Use
Future Use
General 2nd Shot Release
2nd Shot Release 1
2nd Shot Release 2
Input Zone 1
Input Zone 2
Input Zone 3
Input Zone 4
Input Zone 5
Input Zone 6
HISTORY
1=VIEW EVENTS
2=ERASE HISTORY
History Screen
HISTORY
1=VIEW ALL
2=VIEW ALARMS
3=VIEW OTHER EVENTS
View Events Screen
MRP-2001 Series Manual — P/N 53040:H 1/26/2017
Master Programming Level