Specifications - Honeywell Fire-Lite Alarms MRP-2001 Instruction Manual

Pre-action/deluge control panel
Table of Contents

Advertisement

Specifications

Drill
Indicators
Fire Alarm
Supervisory
Trouble
AC Power
Alarm Silenced
Discharge
Piezo sounder for alarm, trouble and supervisory
24 volt operation
Low AC voltage sense
Outputs Programmable for:
Releasing Solenoids
NACs programmable for:
Designed for sprinkler standards NFPA 13, 15 and 16
Disable/Enable control per input zone and output zone
Extensive transient protection
Dual hazard operation
Adjustable waterflow discharge timer and two soak timers
Cross-zone (double-interlock) capability
Pre-programmed and custom application templates
Automatic battery charger with charger supervision
Silent or audible walktest capabilities
Optional Dress Panel DP-51050 (red)
A modified Dress Panel is provided standard with Canadian models: includes an ANN-LED
Annunciator module
Optional Trim Ring TR-CE (red) for semi-flush mounting the cabinet
Optional CAC-5X Class A Converter Module for Outputs and IDCs
Optional 4XTMF Municipal Box Transmitter Module
Optional Digital Alarm Communicators (411, 411UD, 411UDAC)
Optional ANN-SEC card for secondary ANN-BUS
1.2 Specifications
AC Power
MRP-2001/C: 120 VAC, 60 Hz, 3.66 amps
MRP-2001E: 240 VAC, 50/60 Hz, 2.085 amps
Wire size: minimum #14 AWG (2.0 mm
Supervised, nonpower-limited
MRP-2001 Series Manual — P/N 53040:H 1/26/2017
– Silence Inhibit
– Auto-Silence
– Strobe Synchronization (System Sensor, Wheelock, Gentex, Faraday, Amseco)
– Selective Silence (horn-strobe mute)
– Temporal or Steady Signal
– Silenceable or Nonsilenceable
– Release Stage Sounder
) with 600V insulation
2
Product Description
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fire-lite alarms mrp-2001eFire-lite alarms mrp-2001c

Table of Contents