Honeywell Fire-Lite Alarms MRP-2001 Instruction Manual page 115

NFPA 72 Auxiliary Fire Alarm System
NFPA 72 Remote Station Protective Signaling System
Notes:
1. Cut Jumper JP30 on the MRP-2001 main circuit board to supervise placement of the 4XTMF
module.
2. Refer to "4XTMF Transmitter Module Installation" on page 31 for detailed information.
Cutting TBL Jumper allows the
reverse polarity circuit to open with
a system trouble condition if no
alarm condition exists.
Figure C.3 Remote Station Connection Using 4XTMF Module
MRP-2001 Series Manual — P/N 53040:H 1/26/2017
RS82 Remote Station Receiver UL listed.
Refer to Instruction Manual for Remote Station Receiver Model RS82.
NFPA Standard-Specific Requirements
Polarity Shown is
Normal Standby
+ -
+
Power-limited
-
(Dummy load with a 4.7KΩ ¼ watt resistor
when no connection is made)
4XTMF Transmitter Module
115