Range Gear Shift Lever (Hi-Lo) - Kubota BX25DLB Operator's Manual

32 OPERATING THE TRACTOR
(1) Brake pedal
(2) Parking brake lock pedal
4. Start the engine.
5. Raise the Implement.
(see "HYDRAULIC UNIT" section.)
Move the hydraulic control lever rearward.
(1) Hydraulic control lever
(A) "DEPRESS"
(B) "PUSH DOWN (2)
WHILE DEPRESSING (1)"
"RAISED"
(N) "NEUTRAL POSITION"
"LOWERED"
6. Select the Travel Speed.
BRange Gear Shift Lever (Hi-Lo)
The range gear shift can only be shifted when tractor is
completely stopped.
To avoid personal injury:
A Make sure the range shift lever is fully engaged
into "H" or "L" position before climbing or
descending a slope.
Do not force the range gear shift lever.
A If it is difficult to shift the range shift lever into
"NEUTRAL" position;
(1) Depress the brake pedal firmly for several
seconds.
(2) Without reducing the brake pedal force, shift the
range shift lever.
A If it is difficult to shift the range shift lever into "L" or "H"
from "NEUTRAL" position;
(1) Slightly depress the speed control pedal to rotate
the gears inside of transmission.
(2) Release the speed control pedal to "NEUTRAL"
position.
(3) Shift the range shift lever.
A To avoid damage of transmission, stop tractor before
shifting between ranges.
(1) Range gear shift lever
(Hi-Lo)
"HIGH"
(N) "NEUTRAL POSITION"
"LOW"