Set Network - Omron V640 Series User Manual

■ SET NETWORK

This command sets the IP address and subnet mask in ROM.
Command
Command code First octet
A 3
Parameter Description
Parameter
Type IP address setting: 00
Subnet mask setting: 01
First to fourth octets The address is set in decimal in four octets of three characters each.
Response
Response
CR
code
0 0 0Dh
* If an error occurs when writing to EEPROM, error 9A will be returned.
Never turn OFF the power supply to the Amplifier Unit before a response is received from the Amplifier Unit for this
command. Doing so may damage the Amplifier Unit.
The values are enabled when the Amplifier Unit is restarted.
Second octet Third octet
Description
SECTION 4
Reading from/Writing to ID Tags
Fourth octet CR
0Dh
CIDRW System
49
User's Manual