Omron V640 Series User Manual page 63

Item
Offset Specify the CID offset between 0 and 15 bytes.
Length Specify the CID length between 1 and 16 bytes.
Maximum byte of CID Specify the maximum CID length between 1 and 16 bytes.
Write Data For the write data, specify only the number of bytes for the specified
length.
For example, the results display would be as shown below if a CID read was executed with an offset of
0, a length of 16, and a maximum bytes of CID of 16.
Command sent to Amplifier
Unit
Response code
Only visible ASCII characters can be used to read and write data on the CID R/W Tab Page. If charac-
ters that are not visible ASCII characters are detected for a CID read, they will be converted to aster-
isks (*).
Description
Send data
Receive data
Characters that are not visible ASCII
characters are converted to "*".
SECTION 5
Browser Interface
Comments
Specify only visible ASCII
characters.
CIDRW System
User's Manual
61