SECTION 4
Reading from/Writing to ID Tags
■ RESET
All Amplifier Unit processing is stopped, and the initial status is re-established.
Command
Command code
7
F
Response
There is no response to this command.
■ SET WEB PASSWORD
This command sets the Web password.
If you set a password, a Password entry window will be displayed when you start the browser window.
Command
When the Password Is Not Set
Command code
A
2
* Only the following characters can be used in passwords: 0 to 9, a to z, and A to Z. If any other characters are used, error 14 will
occur.
* If the password is not between 1 and 16 characters long, error 14 will occur.
When the Password Is Not Set
Command code
A
2
Response
Response
code
0
0
Never turn OFF the power supply to the Amplifier Unit before a response is received from the Amplifier Unit for this
command. Doing so may damage the Amplifier Unit.
The values are enabled when the Amplifier Unit is restarted.
CIDRW System
48
User's Manual
CR
0Dh
Password (1 to 16 characters)
CR
0Dh
CR
0Dh
CR
0Dh