Table of Contents
Advertisement
D6061/D6071 Unitrol Double Unit Series (Push Side) Power Operator
Prepare Frame and Door
C. Secure Backplates.
1.
Secure backplates to frame using eleven (11):
1/4-20 x 5/8" machine screws or
1/4 x 1-1/2" self-drilling screws from screw
packs in Boxes 1 and 2. (Figure 7)
NOTE: It is important to properly secure
top edge of backplate. Use of blocking
(supplied by others) or shims (provided) to
OR
fill gap between backplate and wall above
header is HIGHLY recommended. Material
must comply with local codes. Failure to
properly secure top of backplate could result
in operator being allowed to 'rock' during
operation. This could result in damage to
operator and diminish operator function.
(Figure 7)
D. Prepare doors for Adjusting Tubes and Shoes.
1.
Locate and prepare adjusting tube and shoe holes in doors.
(Figure 8)
NOTE: Template provided on page 28.
2.
Drill 3/8" (9.5mm) through (4 places) for sex bolts.
Copyright © 2019-2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1031-020 Rev 6 11/20
Door Opening
85°
90°
Angle
13-1/4"
12-5/8"
Dimension E
(336.5)
(320)
Blocking
Figure 7
95°
100°
105°
12"
11-1/2"
11-1/8"
(305)
(292)
(282.5)
Figure 8
110°
10-3/4"
(273)
7
Hide quick links:
Advertisement
Table of Contents
