Table of Contents
Advertisement
Use
Using the blender
• Before assembling the jug (D) choose the most convenient position for the jug handle (D4)
(on the right or on the left).
With the "clic" button (D2) of the blades block (D1) in front of you, place the locating rib (D3)
in the assembly slot located at the base of the jug (D4) (fig. 1a) then lower the blade unit (D1)
down into the second slot (fig. 1b) located at the front of the jug base until the unit is locked
in place (you will hear a click) (fig. 1c).
Make sure that the jug (D4) and the blade unit (D1) are well assembled, press the button
(D2) and place the ingredients in the jug without exceeding the maximum level indicated on it:
* 1.5L for thick mixture
* 1.25 L for liquid mixtures
Make sure that the seal (D5) is on the lid (D6) (fig. 2a) and place the two together on the jug
(D4).
Put the cap (D7) in the slot on the top of the lid.
Place the assembled blender jug (D) on the motor unit (A), with the "clic" button (D2) on the
blade unit aligned with the "clic" button (C) on the motor unit (fig. 2b) and press the jug down
firmly to lock it on the motor unit (you will hear a double click) (fig. 3).
Plug in the appliance and turn the speed selector (B) to the desired position or press "Pulse"
a few times.
To stop the appliance, turn the speed selector (B) to the "0" position. Unplug the appliance.
Remove the jug (D) from the motor unit (A) by pressing the "clic" button (C) then lift off the
jug (fig. 4).
Using the lift herb grinder and spice grinder
• With the herb grinder (E), you can chop ingredients like onion, garlic, meat (cut into pieces),
dried fruits and herbs in a few seconds and make crumbs (from rusks, etc). Do not use the
herb grinder for liquid preparations (fruit juices, etc.).
• With the spice grinder (F), you can grind to a powder a variety of spices in a few seconds:
coriander seeds, peppercorns, etc.
These accessories come with a lid that prevents access to the blades during use. Add the
ingredients to the bowl (E1) or (F1). Line up the symbol
on the bowl (E1) or (F1). Fit the bowl onto the lid and turn the lid clockwise up to
symbol
to lock the assembly (fig. 5).
Place the assembly (E) or (F) on the motor unit, lining up the 2 ribs of the accessory with the
slots on the motor unit, with the "clic" mark on the lid aligned with the "clic" button (C) on the
motor unit (fig. 6a) and press down the accessory firmly to lock it on the motor unit (you will
hear a double click) (fig. 6b).
Plug in the appliance and turn the speed selector (B) to the desired position or press "Pulse" a
few times. Hold the accessory firmly during operation. To stop the appliance, turn the speed
selector (B) back to position "0". Unplug the appliance. Hold the accessory and release it from
the motor unit by pressing the "clic" button (C) on the motor unit (A) (fig. 4).
Unlock the lid in the reverse order of the assembly.
You can then remove the preparation in the bowl.
on the lid (E2) or (F2) with the
66
Advertisement
Table of Contents
