Table of Contents
Advertisement
9
COMMISSIONING & STARTING
9.1
Control Panel
1
2
6
1.
LCD screen. Shows the pressure in working mode.
2.
MANUAL START-STOP pushbutton.
3.
Pushbutton for ENTER or EXIT menu.
4.
Pushbuttons for changing programming values showed in the LCD screen
(1).
5.
ENTER for saving programmed values. Every press is succeeded by a new
field of the CONFIGURATION MENU.
To quit the configuration sequence press MENU (3).
6.
Led lights:
7.
ON/OFF: Change from AUTOMATIC to MANUAL mode or vice versa.
a.
LINE green: Electric supply. ON when it is connected.
b.
FAILURE red: Bright or intermittent depending on type of failure.
c.
PUMP yellow: When it is bright means pump working. It is lit
with the pump stopped or when the device is not connected.
d.
AUTOMATIC green: it is bright in AUTOMATIC mode. When it is
intermittent in MASTER&SLAVE mode it means that this device
will be auxiliary in the following cycle.
7
3
Figure 7
17
4
5
Advertisement
Table of Contents
