After first 25 hours and not to
exceed 30 hours
After first 50 hours
Annually
Every 100 hours or annually
(whichever occurs first)
Every 2 years
Every 500 hours or 5 years
(whichever occurs first)
Every 1000 Hours or 4 years
(whichever occurs first)
Every 1000 hours or 5 years
(whichever occurs first)
According to OEM Schedule
Maintenance Log
Record all maintenance performed on your power package here. Be sure to save all work orders and receipts.
90-8M0069748
APRIL 2012
eng
•
Change the engine oil and filter.
•
Clean the transmission oil filter and change the transmission oil.
•
Touch up the power package with paint and spray with Corrosion Guard.
•
Clean the transmission oil filter and change the transmission oil.
•
Change the engine oil and filter.
•
Replace the fuel filters.
•
Check the steering system and the remote control for loose, missing, or damaged
parts. Lubricate the cables and linkages.
•
Check the engine alignment.
•
Torque the engine mounts.
•
Check the electrical system for loose, damaged, or corroded terminals.
•
Inspect the condition and tension of the engine accessory drive belts.
•
Inspect the cooling system and the exhaust system for damage or leaks. Check
both systems hose clamps for tightness.
•
Disassemble and inspect the engine seawater pump and replace worn
components.
•
Clean the seawater section of the closed cooling system. Clean, inspect, and test
the pressure cap. Check the anodes and replace if eroded by 50% or more.
•
Replace the air filter.
•
Clean the transmission oil filter and change the transmission oil.
•
Replace the engine coolant.
•
Clean the aftercooler core.
•
Replace the engine timing belt.
•
Clean the fuel tank.
•
Check the engine to propeller shaft alignment.
Section 5 - Maintenance
Page 41